eSun PLA Clear 3D Printing Filament


AED 85.00

PLA is an environment-friendly material that is easy to print and has smooth surface. Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model; No pungent smell when printing, safe and environmental protection. Approved by FDA, safer to use; It can be used for conceptual model, rapid prototyping, and metal parts casting.


Shipping Weight : 1.400 Kg
  • High speed printing

  • Smooth printed surface

  • Easy to print

Description

PLA is an environment-friendly material that is easy to print and has smooth surface.Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;No pungent smell when printing, safe and environmental protection.Approved by FDA, safer to use;It can be used for conceptual model, rapid prototyping, and metal parts casting.

 

 

Filament Properties Table
3D PRINTING FILAMENT PLA
Density(g/cm3) 1.2
Heat Distortion Temp(℃,0.45MPa) 53
Melt Flow Index(g/10min) 3.5(190℃/2.16kg)
Tensile Strength(MPa) 72
Elongation at Break(%) 11.8
Flexural Strength(MPa) 90
Flexural Modulus(MPa) 1915
IZOD Impact Strength(kJ/㎡) 5.4
Durability 4/10
Printability 9/10
Recommended printing parameters
Extruder Temperature(℃) 190 – 230℃
Recommended temperature:215℃
Bed temperature(℃)  45 – 60°C
Fan Speed  100%
Printing Speed  40 – 100mm/s
Heated Bed  Optional
Recommended Build Surfaces Masking paper, PVP solid glue, PEI

Submit Your Review

Required fields are marked *

  • John Doe March 22, 2021 at 1:54 pm

    pellentesque habitant morbi tristique senectus et. In dictum non consectetur a erat. Nunc ultrices eros in cursus turpis massa tincidunt ante in nibh mauris cursus mattis. Cras ornare arcu dui vivamus arcu felis bibendum ut tristique.