eSun ePA-CF


AED 220.00

High Strength, High Rigidity, Good Toughness, Wear Resisting Good flame resistance, Flame-retardant Level: UL94-V2; Print temperature range: 240~260℃ Print Base temperature: 80℃ Print Speed:30-60 mm/s; Move Speed:90-150mm/s


Shipping Weight : 1.400 Kg
  • High Strength

  • High Rigidity

  • Good Toughness

  • Wear Resisting

Enhanced Carbon Fiber Filled Nylon:  85% LUVOCOM Nylon 6 (PA6) Coupled with 15% Carbon Fiber. Higher Strength and Rigidity. Better Toughness. Wear Resistance. High Mechanical Strength. Heat Resistance 240°C. Continuous Use Temperature 150°C.ePAHT-CF material are easy to absorb water, please dry it at 70℃ more than 12H before printing.

Stable Dimensional Tolerance:  Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise.

Tangle Free & No Plugging:1KG 3D printer filament, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder. ePAHT-CF is highly rigid, which also means it is easy to break, so please pay attention not to bend the filament when it is in the feeding tube.

Wide Application Compared with ordinary carbon fiber filled nylon (PA-CF) filament, it features with higher toughness and better impact resistance, higher heat resistance and wear resistance. Widely used in automobile industry, defense industry, aerospace, cultural and sports fields, etc.

Vacuumed Sealed Packaging: 1KG Spool Enhanced Carbon Fiber Filled Nylon Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.

PRINT SETTINGS

Hotend: 230°C

First Layer: 230°C

Nozzle Type: Hardened/Disposable

Nozzle Diameter: >0.5mm (0.6mm recommended)

Heated bed: 80°C (we use Elmer's purple glue stick for adhesion)

Min layer time: 5 seconds

Submit Your Review

Required fields are marked *

  • John Doe March 22, 2021 at 1:54 pm

    pellentesque habitant morbi tristique senectus et. In dictum non consectetur a erat. Nunc ultrices eros in cursus turpis massa tincidunt ante in nibh mauris cursus mattis. Cras ornare arcu dui vivamus arcu felis bibendum ut tristique.